Retreat Dodge Durango 2017 Radio Code In Seconds

Radio showing LOCKED? Your Dodge Durango 2017 can be unlocked quickly using the radio unit's serial number. Enter it in the form and use the steps below if you need guidance.

You're covered by a 100% money-back guarantee.
Just follow our simple verification steps.
Review our Refund Policy for complete terms.

You only need your serial number from the radio.
No documents required.

You'll usually get your Dodge Durango code in seconds.
Some Dodge cases require manual processing (24h).

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T00BE351823197 (T00BE)
TM9341100221 (TM9)
T0MYD164822563 (T0MYD)
Dodge Durango 2017 car photo
How to find Dodge Durango 2017 radio serial number
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
255+ Reviews
See reviews →
Full refund if your code fails

How to Get Your 2017 Dodge Durango Radio Code

  • Skip long troubleshooting discussions or service visits - you can find the code online using the radio serial number.
  • Identify the serial number. You will always find it on the unit itself, and in some cases you can see it on the Durango's radio screen.
  • Type it into the field above, and the software will identify the correct 2017 Durango unlock code.
  • After receiving your code, type it in using Durango's radio controls to release the blockade successfully.
  • The entire process takes just a short moment and requires minimal effort.

Finding the Radio S/N for Dodge

The useful fact to know is that factory radios use a unique S/N to identify each unitindividually.

Your anti-theft system matches the code directly to the serial.

Different from vehicle-specific data like VIN or registration information, it is not determined by the model or production year, so you'll be able to get it even if you have an aftermarket radio.

Depending on the manufacturer and radio installed in your Dodge Durango, the retrieval method varies.

These are the best ways to locate it.

Radios Offered in the 2017 Durango

2017 was the final model year that the Durango stayed on the Harman-built Uconnect platform; the Panasonic 4C transition did not happen on the Durango until 2018.

  1. Uconnect 5.0 (sales code RA2) - base radio on the SXT; identifiable by the small 5-inch colour display flanked by hard buttons and rotary knobs. Most common 2017 Durango factory head unit.
  2. Uconnect 8.4 (sales code RA3) - mid-tier 8.4-inch touchscreen; no NAV tile on the home menu and no on-screen GPS. Common on Limited and R/T trims.
  3. Uconnect 8.4N (sales code RA4) - top-tier 8.4-inch touchscreen standard on Citadel; same bezel as RA3 but with a NAV tile on the home menu and an HD Radio logo on FM. Less common than the RA3.

Accessing the Serial Number Through the Radio Menu

Try the following for your 2017 Dodge Durango:

The 2017 Dodge Durango seats up to 7 passengers and features the Uconnect 8.4" (RA3) touchscreen elevated in the SUV's tall center stack. The serial number can be found directly on screen via Dealer Mode.

Climate Button Method:

  1. Turn the ignition to ACC or ON.
  2. In the Durango's tall center stack, find the Climate Up, Climate Down, and Front Defrost buttons below the 8.4" screen. Hold all three together for 5 seconds.
  3. Dealer Mode opens on screen.
  4. Go to: System Info → Radio Part Info → Serial Number.

Alternative: Hold Temperature Up (red) and Temperature Down (blue) simultaneously for 5 seconds to open Engineering Mode, then navigate as above.

Using Hidden Radio Menus to Find the Serial

On 2017 Durango models equipped with the 8.4-inch Uconnect screen, the head unit's built-in dealer/diagnostic menu prints the radio serial number on the touchscreen, so the unit does not have to be removed from the dash. The base Uconnect 5.0 (RA2) does not have a documented on-screen serial routine.

Uconnect 8.4 (RA3) and Uconnect 8.4N (RA4)

  1. Set the ignition to RUN/ACC and let the Uconnect interface finish loading.
  2. Simultaneously press and hold the driver-side temperature UP, the driver-side temperature DOWN, and the front DEFROST buttons.
  3. Keep the three buttons pressed for around 7-10 seconds until the dealer/diagnostic screen appears.
  4. Open the radio or system information section to view the serial number listed on screen.
  5. Photograph the screen so the characters can be transcribed accurately later.

Durango's Hardware Label Method

If the serial does not appear on screen, the next step is checking the radio itself.

Many Dodge radios require physical access to the serial tag attached to the unit.

Usual approach:

  1. Start by completely powering down the engine - pull the key out.
  2. Then detach the dashboard bezel.
  3. Next, loosen the mounting points and slide the radio forward.
  4. Look for a factory sticker showing the serial number.

If Dealer Mode is inaccessible on your 2017 Durango, the RA3 radio needs to be removed to read the serial label. The Durango's elevated console makes the bezel easy to approach:

  1. Remove the center stack trim – The Durango's center bezel surrounds the 8.4" screen and climate controls. With a trim removal tool, start at the bottom to release the clip-secured panel.
  2. Remove the 4 Torx T20 screws – These are at the corners of the radio frame.
  3. Slide the unit out – Pull the radio forward to expose the serial label on the side or top of the unit.

The serial is a 14-character code on a barcode label. Wiring can stay connected while you note the serial.

Releasing the Unit to Access the S/N on the Tag

When the screen-based method is not an option - for example on the base Uconnect 5.0 head unit - the chassis label on the back/top of the radio is the next reliable source for the serial number on the 2017 Durango.

  1. Safety first: switch the ignition off, remove the key, disconnect the negative battery terminal, and wait a few minutes; never tug on the yellow airbag/SRS connectors and stick to plastic trim tools to avoid shorts and broken clips.
  2. Tools you will need: plastic trim removal tool set, 7 mm socket, Phillips screwdriver, small Torx bit set, flashlight.
  3. Pop the centre dash bezel free using a plastic pry tool, starting at the lower edge and working up the sides; the Durango bezel is secured by hidden clip retainers rather than exposed fasteners.
  4. Disconnect the hazard switch and any HVAC/control connectors at the rear of the bezel, then set the trim aside on a clean cloth.
  5. Remove the four 7 mm bolts (two upper, two lower) holding the radio cage to the dash support bracket.
  6. Pull the radio straight rearward and unplug the antenna lead and the multi-pin power/data connectors on the back.
  7. Locate the printed sticker/barcode label on the top or side of the radio chassis - this carries the serial number along with the part number.
  8. Photograph the label and double-check ambiguous characters such as 0/O and 1/I before submitting the serial.
Dodge Durango 2017 radio serial number label location

Example: Dodge Durango serial number label location

Common S/N Formats Used on 2017 Durango Units

The 2017 Dodge Durango's Uconnect 8.4" (RA3) is supplied by Harman or Continental. Common serial prefixes for this SUV:

  • T00AM – Harman VP2 Uconnect (most common format)
  • T00BE – Continental variant
  • TM9 – Older Harman production units

Radio designations on the Durango: RA3 (standard), VP2 (with Harman Kardon audio). Serial: 14 characters.

Important The Durango's radio label includes a part number (P05064... or 68...). Only the serial number is needed to generate the unlock code.

Typical Radio Serial Prefixes and Formats

The factory radios fitted to the 2017 Durango use the standard Mopar/Continental head-unit serial style. The exact prefix depends on which Uconnect tier was installed and which supplier built the unit.

Uconnect 8.4 (RA3) and Uconnect 8.4N (RA4)

  1. Typically printed as a 14-character alphanumeric string on the chassis label.
  2. Commonly begins with T - frequent prefixes are T00AM, TM9, or TQ1 - or with A2C on Continental-built variants.
  3. Often a continuous run of letters and digits with no dashes or spaces on the printed sticker.

Uconnect 5.0 (RA2)

  1. Usually carries a Mopar/Harman-style serial on a chassis label; treat the printed sticker on the unit as the authoritative reference.
  2. Always copy the serial exactly as printed and avoid guessing missing characters.

How to Enter the Radio Code

After locating the S/N and retrieved the unlock code, the final part is entering it into your radio.

Dodge OEM units display a locked screen when ready for input.

The process is usually straightforward, but button layouts and confirmation methods may change depending on the radio version installed in your Durango.

Detailed Input Instructions for Durango 2017

Code entry on the 2017 Durango's Uconnect 8.4":

  1. With ignition ON, the screen shows "ENTER CODE".
  2. Tap the on-screen number pad to enter each digit of your 4-digit code on the Durango's 8.4" display.
  3. The radio confirms automatically after the 4th digit — nothing else is needed.

Lockout: 3 incorrect attempts = 60-minute lockout. Leave the Durango's ignition ON. Turning it off resets the timer.

In-depth Entering Instructions for Durango 2017

Once the unlock code has been retrieved, the 2017 Durango radio is unlocked directly from the head unit - no scan tool or dealer visit is needed.

  1. Limited attempts: Mopar/Uconnect units only accept three incorrect tries before going into a WAIT state, so confirm every digit before entering anything.
  2. Place the ignition in RUN/ACC so the radio powers up but the engine stays off.
  3. Wait for the display to show CODE, Enter Anti-Theft Code, or a similar prompt.
  4. On the 8.4 Uconnect units (RA3/RA4), tap the on-screen number pad to enter each digit; on the base Uconnect 5.0 (RA2), use the numbered preset buttons to key in the code in sequence.
  5. Confirm the entry with the on-screen OK/Enter button or the tune/menu knob, depending on the radio variant.
  6. If WAIT appears after three wrong attempts, leave the radio powered with the ignition in RUN for a continuous 30 minutes before trying the correct code again.

Understanding Unlock Issues with Your Durango

If the Durango's radio screen doesn't show a code prompt after a battery event:

  • Confirm the ignition is fully in ON (not ACC) and give the system 15–20 seconds to boot.
  • Inspect the radio fuse in the Durango under the hood or under the dash. Fuse failure prevents any radio power.
  • A single screen tap may activate the code prompt on certain Durango units.

If the screen stays blank, a blown fuse is the first thing to investigate.

Three wrong code entries on the Durango's Uconnect activate a 60-minute lockout, showing "WAIT" on screen:

  1. Leave the ignition ON in the Durango — engine off is fine but ignition must stay in ON.
  2. Let the timer count down for the full 60 minutes.
  3. Cycling the ignition restarts the lockout.

Once the 60 minutes are up, try again with the verified code.

In the 2017 Durango, all code entry is via the 8.4" touchscreen — no physical buttons are used. Once "ENTER CODE" is shown:

  • Press each number on the on-screen keypad.
  • The radio unlocks after the final number — no extra step is needed.

Should the display not register taps, cycle the ignition and wait 30 seconds.

The RA3 label in the Durango lists several numbers:

  • Serial number — 14 alphanumeric characters, starting with T00AM, T00BE, or TM9. This is the one you submit.
  • Part number — starts with P05064 or 68. Not needed.

On the Durango, Dealer Mode is the most reliable way: System Info → Radio Part Info → Serial Number. No removal required.

A rejected code on the Durango's Uconnect 8.4" almost always means a serial number error. The label contains the serial (14 chars, starts with T00AM, T00BE, or TM9) and the part number (P... or 68...) — only the serial generates the code.

Double-check the serial on the Durango's display or the label and contact support for a free re-check if needed.

Why Did the Radio Lock and Ask for a Code?

Owners of this full-size SUV encounter radio lockouts primarily because of:

  • Towing-related electrical work — those installing tow packages or work on the electrical system for towing accessories will encounter this.
  • Battery replacement — the Durango's higher electrical demand can wear batteries faster, making replacements more frequent, and every replacement triggers the code screen.
  • Long periods unused — SUVs used seasonally can drain enough to trigger the anti-theft.
  • Used purchase — buying a used Durango without the prior owner's code requires the code immediately.

The unlock code is permanently assigned to the RA3 serial number and never changes.

Get Your Dodge Durango 2017 Radio Code Now