How to Get 2014 Dodge Durango Radio Code [Instant]

Unlock your 2014 Dodge Durango radio in just a few steps. Simply enter the radio serial to generate your code - no VIN required. Follow the full guide below if you need help finding or entering your code.

Your purchase is risk-free with our refund policy.
A proof that the code failed may be required.
Review our Refund Policy for complete terms.

Most Durango codes are delivered instantly.
In rare cases, Dodge Durango radio code delivery can take up to a day.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T00BE351823197 (T00BE)
TM9341100221 (TM9)
T0MYD164822563 (T0MYD)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
255+ Reviews
See reviews →
Full refund if your code fails
Dodge Durango 2014 car photo
How to find Dodge Durango 2014 radio serial number

Why Is the Radio Asking for a Code?

Owners of this full-size SUV face this most commonly due to:

  • Towing-related electrical work — those installing tow packages or disconnect the battery for towing accessories trigger the lock.
  • Battery replacement — larger SUVs puts more strain on the battery, making replacements more frequent, and every replacement triggers the code screen.
  • Long periods unused — Durangos left parked for weeks may deplete the battery to trigger the anti-theft.
  • Used purchase — buying a used Durango without the prior owner's code requires the code immediately.

The unlock code is permanently tied to the RA3 serial number and always remains valid.

How 2014 Dodge Durango Radio Code Lookup Works

Getting your radio code takes only a few easy steps.

  1. Locate the radio's serial number - this is the only information required to generate the correct unlock code.
    The difference with the dealership lookup is that no VIN or paperwork is needed.
  2. Enter the serial number into our generator above.
    Our system checks it against a database of supported radios and automatically catches the matching security code.
  3. In most cases, the code appears instantly on the screen after payment and is also sent to your email , just in case.
    If manual verification is required (rare situations), you'll be informed before checkout.
  4. When you receive it, simply enter it into your radio to restore the functionality.

Got the Code? Here's How to Enter It

Once you receive the correct unlock code based on the serial number, you can restore default functionality by entering it into the unit.

The code entry process depends on the radio interface, but most 2014 Durango systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.

You will typically see ENTER CODE displayed on screen.

Step-by-Step - The Correct Way to Enter It

Code entry on the 2014 Durango's Uconnect 8.4":

  1. With ignition ON, the screen shows "ENTER CODE".
  2. Tap the on-screen number pad to enter each digit of your 4-digit code on the Durango's 8.4" display.
  3. The radio confirms automatically after the 4th digit — nothing else is required.

Lockout: 3 incorrect attempts = 60-minute lockout. Leave the Durango's ignition ON. Turning it off restarts the wait.

Step-by-Step Code Input Guide

After retrieving the unlock code for a 2014 Durango radio, the digits can be entered directly at the head unit - no scan tool or dealer visit is required.

  1. Limited attempts: Mopar/Uconnect head units accept only three incorrect tries before entering a WAIT state, so verify every digit before pressing it.
  2. Turn the ignition to RUN/ACC so the radio powers up while the engine stays off.
  3. Wait for the display to show CODE, Enter Anti-Theft Code, or a similar prompt.
  4. On the 8.4 Uconnect units (RA3/RA4), key in the digits using the on-screen number pad; on the base Uconnect 5.0 (RA2), use the numbered preset buttons in sequence.
  5. Confirm the entry with the on-screen OK/Enter button or with the tune/menu knob on the RA2.
  6. If the screen displays WAIT after three wrong attempts, leave the ignition in RUN with the radio powered for a continuous 30 minutes before trying the correct code again.

How Serial Numbers Work and Where to Find Them on 2014 Dodge Durango Radios

Very important fact to know is that factory radios use a unique serial number to identify each unitindividually.

The anti-theft system matches the code directly to this serial.

Different from vehicle-specific data such as VIN or registration info, it is not determined by the model or production year, so you'll be able to get it even if you have a radio that you bought afterwards.

Depending on the manufacturer and radio installed in your Dodge Durango, the retrieval method varies.

These are the most reliable ways to locate it.

Factory Radios on the 2014 Dodge Durango

The 2014 Durango shipped with one of three Harman-built head units, all easy to tell apart at a glance by screen size and the presence of a NAV button on the touchscreen.

  1. Uconnect 5.0 (sales code RA2) - standard on the SXT trim; identifiable by a small 5-inch colour screen flanked by hard buttons and rotary tune/volume knobs, with no on-screen NAV icon. This is the most common radio fitted to base 2014 Durangos.
  2. Uconnect 8.4 (sales code RA3) - optional on SXT/Limited; identifiable by the large 8.4-inch touchscreen that fills the centre stack with no surrounding hard buttons, but no NAV tile on the home screen. Mid-volume option through 2014.
  3. Uconnect 8.4N (sales code RA4) - standard on Citadel and optional on R/T/Limited; identical 8.4-inch bezel as the RA3 but shows a NAV tile on the home menu and an HD Radio logo when tuned to FM. Less common than the RA3 in 2014.

View the S/N on the Radio Screen

The method for 2014 Dodge Durango is this:

The 2014 Dodge Durango seats up to 7 passengers and comes with the Uconnect 8.4" (RA3) touchscreen positioned high in the console. The serial number can be found directly on screen via Dealer Mode.

Climate Button Method:

  1. Turn the ignition to ACC or ON.
  2. In the Durango's tall center stack, locate the Climate Up, Climate Down, and Front Defrost buttons below the 8.4" screen. Hold all three at the same time for 5 seconds.
  3. Dealer Mode opens on screen.
  4. Go to: System Info → Radio Part Info → Serial Number.

Alternative: Hold Temperature Up (red) and Temperature Down (blue) simultaneously for 5 seconds to access Engineering Mode, then follow the same menu path.

Display-Based Serial Number Retrieval

For 2014 Durango models fitted with the 8.4-inch Uconnect head unit, the radio serial number can be read directly from the touchscreen via Chrysler's hidden dealer/diagnostic menu - no chassis label inspection required. The base Uconnect 5.0 (RA2) does not have a documented on-screen serial routine.

Uconnect 8.4 (RA3) and Uconnect 8.4N (RA4)

  1. Turn the ignition to RUN/ACC and let the Uconnect screen finish booting.
  2. Press and hold the driver-side temperature UP, the driver-side temperature DOWN, and the front DEFROST buttons together.
  3. Keep all three buttons held for roughly 7-10 seconds until the dealer/diagnostic interface opens.
  4. Browse to the radio or system information section and read the serial number listed on screen.
  5. Photograph the screen so each character can be transcribed without typos.

Find it by Pulling Out the Unit

If the serial number cannot be accessed via display, use the hardware method.

Most Dodge Durango factory radios include a sticker with the serial number printed on the chassis.

Steps:

  1. Turn off the vehicle.
  2. Lift the dashboard frame surrounding the radio.
  3. Unscrew the clips.
  4. Slide the unit slightly out to access the label.

The serial number is usually located near the printed code.

If Dealer Mode is inaccessible on your 2014 Durango, the RA3 radio needs to be removed to access the serial label. The Durango's elevated console makes the bezel easy to approach:

  1. Remove the center stack trim – The Durango's trim panel surrounds the 8.4" screen and climate controls. With a trim removal tool, start at the bottom to pop off the friction-clipped panel.
  2. Remove the 4 Torx T20 screws – Found at the corners of the radio frame.
  3. Slide the unit out – Ease the radio forward to expose the serial label on the side or top of the unit.

The serial is a 14-character code on a barcode label. Wiring can remain attached while you record the serial.

View Serial by Pulling Out the Radio Unit

When the on-screen method is not an option - for example on the base Uconnect 5.0 (RA2) - the printed chassis label is the next reliable source for the serial on a 2014 Durango.

  1. Safety first: switch the ignition off, remove the key, disconnect the negative battery terminal, and wait several minutes before touching wiring; never tug on the yellow airbag/SRS connectors and stick to plastic trim tools so nothing shorts or breaks.
  2. Tools you will need: plastic trim removal kit, 7 mm socket with short extension, Phillips screwdriver, small Torx bit set, flashlight.
  3. Pry the centre dash bezel out with a plastic trim tool, starting at the lower edge and working up the sides; the Durango bezel is held by hidden clip retainers rather than visible screws.
  4. Disconnect the hazard switch and any HVAC/control connectors at the rear of the bezel, then set the trim aside on a clean cloth.
  5. Remove the four 7 mm bolts (two upper, two lower) holding the radio cage to the dash support bracket.
  6. Pull the radio straight rearward and unplug the antenna lead and the multi-pin power/data connectors on the back of the unit.
  7. The serial number is printed on a barcode/sticker label on the top or side of the radio chassis, alongside the part number and supplier markings.
  8. Photograph the label up close and double-check ambiguous characters such as 0/O and 1/I before submitting the serial.
Dodge Durango 2014 radio serial number label location

Example: Dodge Durango serial number label location

Typical Serial Number Formats for 2014 Durango Radios

The 2014 Dodge Durango's Uconnect 8.4" (RA3) is manufactured by Harman or Continental. Standard serial prefixes for this SUV:

  • T00AM – Harman VP2 Uconnect (most common format)
  • T00BE – Continental version
  • TM9 – Older Harman production units

Radio designations on the Durango: RA3 (standard), VP2 (with Harman Kardon audio). Serial: 14 characters.

Important The Durango's radio label includes a part number (P05064... or 68...). The serial alone is used to generate the unlock code.

Common S/N Formats Used on 2014 Durango Units

The factory radios fitted to the 2014 Durango use the standard Mopar/Continental head-unit serial style. The exact prefix depends on which Uconnect tier the vehicle shipped with and which supplier built the unit.

Uconnect 8.4 (RA3) and Uconnect 8.4N (RA4)

  1. Typically printed as a 14-character alphanumeric string on the chassis label.
  2. Commonly begins with T - frequent prefixes include T00AM, TM9, and TQ1 - or with A2C on Continental-built variants.
  3. Often a continuous run of letters and digits with no dashes or spaces.

Uconnect 5.0 (RA2)

  1. Usually carries a Mopar/Harman-style serial on the chassis sticker, so use the printed label on the unit itself as the reference.
  2. Copy the serial exactly as printed and avoid guessing letters or digits that look unclear.

Durango 2014 Common Radio Problems

In the 2014 Durango, all code entry is via the 8.4" touchscreen — no preset buttons are involved. Once "ENTER CODE" is shown:

  • Press each number on the touchscreen number pad.
  • The radio auto-confirms after the 4th digit — no extra step is needed.

Should the display not register taps, cycle the ignition and wait 30 seconds.

When no "ENTER CODE" appears after a battery event:

  • Confirm the ignition is fully in ON (not ACC) and give the system a moment to boot.
  • Check the radio fuse in the Durango under the hood or under the dash. Fuse failure prevents any radio power.
  • Tapping the display may trigger the code prompt on certain Durango units.

Should nothing appear, wiring issue is the most probable cause.

The RA3 label in the Durango lists multiple identifiers:

  • Serial number — 14 alphanumeric characters, prefixed by T00AM, T00BE, or TM9. Use this.
  • Part number — begins with P05064 or 68. Do not submit this.

On the Durango, Dealer Mode is the most reliable way: System Info → Radio Part Info → Serial Number. No removal required.

Three wrong code entries on the Durango's Uconnect cause a 60-minute lockout, displaying "WAIT" on screen:

  1. Leave the ignition ON in the Durango — engine off is fine but ignition must stay in ON.
  2. Wait for the entire 60 minutes.
  3. Cycling the ignition restarts the lockout.

Once the 60 minutes are up, try again with the verified code.

A rejected code on the Durango's Uconnect 8.4" almost always means the wrong serial was submitted. The label shows both the serial (14 chars, starts with T00AM, T00BE, or TM9) and the part number (P... or 68...) — submit only the serial.

Double-check the serial on the Durango's display or the label and reach out for a free re-check if needed.

Get Your Dodge Durango 2014 Radio Code Now