Acura NSX Radio Security Code Explained
A radio unlock code, also known as an anti-theft code is a unique numeric unlock key that reactivates your car audio system after it has been disabled.
This security code is triggered when the radio detects a power interruption.
This system helps prevent stolen radios from working in other vehicles.
If power is interrupted, the radio stops functioning and asks for the CODE before it can function normally.
Once the correct numbers is entered, the stereo is fully reactivated.
When a Radio Unlock Code Is Needed?
Your radio may enter anti-theft mode when it loses power.
These are the some well-known scenarios that activate the radio code prompt.
After a Battery Work
A disconnected battery is the most common reason a Acura NSX radio asks for a code.
Even a momentary power loss is enough to activate the built-in anti-theft lock.
More Situations That Can Lock Your NSX's Radio
- After an ECU or software reset, the radio may lock.
- A blown fuse can cause the Acura NSX radio to request a security code.
- Jump-starting the vehicle can trigger anti-theft mode, requiring the unlock code.
- Installing a used head unit will require the original anti-theft code.
Things to Try First
There is a chance your Acura NSX radio code is already somewhere in your car.
Before using a paid service, take a few minutes check the places below - it costs nothing to look.
Check the Vehicle Documents
- Inside the glovebox, sometimes on a small card.
- In the vehicle handbook, often on a sticker page.
- On the head unit itself, if it was removed before.
- In your service book from the previous owner.
- In the spare wheel area, on a radio label.
Can You Get a Acura NSX Radio Code from the Dealership?
A Acura dealer can usually retrieve the security code using your NSX's vehicle identification number.
In most cases, you need to contact the service department or visit the dealership and prove ownership.
Once verified, they can generate the original anti-theft code for your radio.
Limitations:
- Some older Acura NSX radios may require manual lookup.
- You usually need to visit in person and bring ID.
- The process can take hours depending on the model and database.
- Dealers often charge a fee for the lookup service and it can cost more than 100$.
Finding the S/N on a NSX
The only thing you'll need to get the code is your radio's radio serial. No extra vehicle data is required.
On most Acura models, you can find it in one of these places:
- Displayed on the radio screen (occasionally by using a key combination)
- On the radio unit itself - you'll need to extract it and write down your serial (which is fairly easy)
Search for something like: S/N or Serial.
1. Get the S/N from Acura NSX's Screen
Accessing the Serial Number in Acura NSX
The Acura NSX (2017–2022) is Acura's hybrid supercar with a sophisticated infotainment system. While the NSX is a rare vehicle, its radio system uses the same Honda-based architecture for serial number display.
Primary Method (Settings Menu):
- Start the vehicle (the NSX requires the engine to be running for full infotainment access).
- Navigate to Settings → System → About on the touchscreen.
- The serial number should be listed in the system information.
Alternative Method:
The classic Honda 1+6 button method may also work: hold preset buttons 1 and 6 while turning the audio system ON.
NSX Notes:
- 2017–2022 NSX (2nd Gen) – All NSX models use the same infotainment system. The dual-clutch hybrid powertrain does not affect the radio unlock procedure.
- Due to the NSX's limited production, removal is not recommended. Try all on-screen methods first.
Tip: If you need assistance, an Acura dealer with NSX expertise can help locate the serial without disassembly.
2. Find the Serial Number on the Radio Unit's Sticker
To find the serial number, you'll need to pull out the head unit from the dashboard.
- Start by turning off the vehicle and removing the trim panel.
- Next, release the clips and pull the unit forward to check the label on the side of the radio. Pay attention not to damage the cables that the unit is connected to.
- Write down full serial number precisely and come back to the website.
- Know that serial number and part number are not the same thing. You will find both of them on the sticker, and you only need for the serial.
Physical Removal of Your Acura NSX Radio
If the on-screen method doesn't work, the Acura NSX radio can be removed by unclipping the surrounding trim panel. The serial is on a label on the top or side of the radio unit. Take care with the trim clips.
Example: Acura NSX serial number label location
Serial Number Prefixes You'll See on Acura NSX
The radio uses a serial number in U####L#### format (e.g. U3456 L7890). Acura shares this format with Honda. Navigation systems display a GNA or HBM prefix.
How to Enter the Anti-Theft Code on Your NSX
With your code ready, it's time to enter it into the Acura NSX's radio.
The locked radio will usually show a blank screen with dashes.
Use the radio presets or a rotary dial to dial in each digit, then confirm to activate the head unit.
To input your Acura NSX unlock code:
- Start the vehicle – The infotainment will display a code prompt.
- Use the touchscreen numeric keypad to enter each digit of your code.
- Press "Enter" or "Confirm" to submit.
Alternative: If a traditional "CODE" prompt appears, use preset buttons 1–5 to enter your 5-digit code, then hold button 6 to confirm.
Lockout Warning: After 3 incorrect attempts, the system enters a timed lockout. Keep the ignition ON during the waiting period.