Generate Dodge Charger 2023 Radio Code With Radio S/N

Need the radio code for your Dodge Charger 2023? The unlock process is based on the radio's unit serial, and it's the same for all Dodges. But if you want in-depth instructions for your exact 2023 Charger, follow our guide.

You'll usually get your Dodge Charger code in seconds.
In rare cases, Dodge Charger radio code delivery can take up to a day.

Your purchase is risk-free with our refund policy.
A quick proof may be required.
See our Refund Policy for full details.

Simply enter the radio serial number (no VIN required).
It takes less than a minute.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T00BE351823197 (T00BE)
TM9341100221 (TM9)
T0MYD164822563 (T0MYD)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
255+ Reviews
See reviews →
Full refund if your code fails
Dodge Charger 2023 car photo
How to find Dodge Charger 2023 radio serial number

How to Get Your 2023 Dodge Charger Radio Code

  • Skip long troubleshooting discussions or service visits - you can find the code online using the radio S/N.
  • Start by finding the serial number. You will always find it on the unit itself, and in some cases it can be visible on the Charger's display.
  • Type it into the generator above, and our software will retrieve the correct 2023 Charger unlock code.
  • After getting it, input it using Charger's radio controls to unlock the system successfully.
  • The entire process takes just a short moment and requires zero paperwork and no dealer visit.

Unlocking the Radio After Code Generation

Now that you've found the radio serial and generated the unlock code, the next step is entering it into your radio.

Dodge factory radios display a locked screen when ready for input.

The process is usually quick, but button layouts and confirmation methods may change depending on the radio version installed in your Charger.

In-depth Input Instructions for Charger 2023

Entering the unlock code on the 2023 Charger's Uconnect 4C:

  1. With ignition ON, the screen shows "ENTER CODE" with an on-screen keypad.
  2. Enter each digit of your 4-digit code on the Charger's 8.4" touchscreen.
  3. The radio confirms automatically after the 4th digit — no separate confirm.

Lockout Warning: 3 wrong attempts = 60-minute lockout. Leave the Charger's ignition ON. Turning it off restarts the countdown.

Step-by-Step Correct Entering Process

Once the unlock code has been retrieved for a 2023 Charger Uconnect head unit, it can be entered directly at the dash - no scan tool or dealer visit required.

  1. Limited attempts: Mopar/Uconnect head units only accept three incorrect tries before the radio enters a WAIT state, so confirm every digit before pressing it.
  2. Place the ignition in RUN/ACC so the radio powers up but the engine stays off.
  3. Wait for the display to show CODE, Please enter Anti-Theft Code, or a similar prompt.
  4. On the Uconnect 4C 8.4 (UAQ/UAS/UCQ), tap the on-screen number pad to enter each digit and confirm with the OK/Enter touch button.
  5. On the Uconnect 4 7-inch (NA), press the numbered preset buttons in sequence - or use the on-screen keypad when the unit prompts for it.
  6. If WAIT appears after wrong attempts, leave the radio powered with the ignition in RUN for the documented cool-down period (about 30 minutes; the vehicle may be driven during this time) before trying the correct code again.

Can't Locate Your Radio Serial Number? Follow The Steps Below for Dodge Charger 2023

Very useful fact to know is that factory radios use a unique serial number to identify each unit.

The security system links the code directly to the serial.

Different from car-specific data such as VIN or registration information, it is not determined by the model or production year, so you'll be able to retrieve it even if you have an aftermarket radio.

Depending on the manufacturer and radio installed in your Dodge Charger, the retrieval method is different.

Here are the best ways to find it.

Which Head Unit Is in Your 2023 Charger?

2023 was the final model year for the LD-platform Charger and its Hemi V8 line-up - the "Last Call" year. The radio range still uses the Uconnect 4 family with three head units, separated by screen size and built-in navigation.

  1. Uconnect 4 (UAG) - 7-inch non-NAV touchscreen. Standard on 2023 SXT. Visual ID: 7-inch display centred in the dash opening with bezel material filling the surround; Apple CarPlay and Android Auto are supported, but there is no factory NAV or Map tile on the home screen. The most common radio fitted to 2023 Chargers.
  2. Uconnect 4C (UAS) - 8.4-inch non-NAV touchscreen. Standard on GT, R/T and Scat Pack, optional on SXT. Visual ID: 8.4-inch screen filling the bezel opening, CarPlay and Android Auto present, but no Map/NAV tile because GPS navigation is not built in.
  3. Uconnect 4C NAV (UAQ) - 8.4-inch touchscreen with built-in GPS. Standard on SRT Hellcat, Hellcat Redeye and the Scat Pack "Swinger" / "Super Bee" / "Black Ghost" Last Call special editions. Visual ID: identical 8.4-inch bezel and glass to UAS, but the home screen carries a dedicated NAV/Map tile and SRT Performance Pages is unlocked.

Field test: 7-inch = UAG, 8.4-inch with no Map tile = UAS, 8.4-inch with a Map tile and SRT Performance Pages = UAQ.

Check the Display First - Serial Retrieval Without Tools

These are the steps you need to follow for 2023 Dodge Charger:

The 2023 Dodge Charger's last-run Uconnect 4C (RA4) 8.4" touchscreen sits prominently in the performance sedan's center stack. The serial number is retrievable directly on screen via Dealer Mode:

  1. Turn ignition to ACC or ON.
  2. Press the bottom-left and bottom-right corners of the physical screen bezel (the plastic frame, not the glass) simultaneously for 5 seconds.
  3. Dealer Mode loads on the display.
  4. Navigate to: System Info → Radio Part Info → Serial Number.

Note Some 2023 Charger units may have Dealer Mode restricted after a software update. If the bezel press doesn't respond, physical radio removal is required.

Access the S/N via the Radio Screen

The 2023 Charger continues with the Uconnect 4 line-up - 8.4-inch UAQ NAV, 8.4-inch UAS non-NAV, the Canadian UCQ equivalent, and the smaller 7-inch Uconnect 4 NA. The radio serial number can usually be read on screen via the hidden dealer/diagnostic menu, although newer Uconnect software builds have tightened dealer-mode access on some cars.

Uconnect 4C 8.4 (UAQ / UAS / UCQ)

  1. Switch the ignition to RUN/ACC and wait for the Uconnect interface to finish booting.
  2. Press and hold the driver-side temperature UP, the driver-side temperature DOWN, and the front DEFROST buttons together for roughly 5-10 seconds.
  3. If the climate-button shortcut does nothing on a software-updated unit, press and hold the bottom-left and bottom-right corners of the screen at the same time for about 5-10 seconds.
  4. Browse to the radio/system info section to view the serial number on screen.
  5. Photograph the screen before transcribing the characters.

Uconnect 4 7-inch (NA)

  1. Place the ignition in RUN/ACC and let the screen finish loading.
  2. Press and hold both temperature UP and temperature DOWN buttons together for around 5-10 seconds to enter the engineering menu.
  3. Open System Info / Target Main Data to view the serial number on screen.
  4. Take a photo of the display so the characters can be copied accurately.

Find it by Pulling Out the Unit

If the serial number cannot be accessed via display, use the hardware method.

Most Dodge Charger factory radios include a tag with the serial number printed on the chassis.

Process details:

  • Disable power.
  • Lift away surrounding panel pieces.
  • Release clips holding the radio.
  • Pull forward to inspect the label.

If Dealer Mode is blocked on your 2023 Charger, the RA4 radio needs to be removed to read the serial label. The Charger's cockpit-style center stack makes the procedure manageable:

  1. Remove the center stack bezel – The Charger's bezel covers the 8.4" display. Work a plastic trim tool around the edges to pop off the friction-clipped panel.
  2. Remove the 4 Torx T20 screws – Holding the radio frame to the dash structure.
  3. Pull the unit forward – Slide the radio forward to read the serial label on the side surface.

The 14-character serial is on a barcode sticker. Cables don't need to be unplugged.

Locate Serial on Charger's Radio Chassis

If dealer mode has been restricted on the 2023 Charger by a Uconnect software update, the printed chassis label remains the next reliable source. The Uconnect 4 head unit on the LD Charger sits in a centre stack closely tied to the climate cluster, so work slowly and methodically.

  1. Safety first: turn the ignition off, take out the key, disconnect the negative battery terminal, and wait a few minutes before touching wiring; never disturb the yellow airbag/SRS connectors and use plastic trim tools to avoid shorts and broken clips.
  2. Tools you will need: plastic trim removal kit, Phillips and small Torx bit set, 7mm/10mm socket set, flashlight.
  3. Pop the centre stack bezel free using a plastic pry tool starting at the lower edge and working up the sides; on the LD Charger this bezel also carries the climate cluster, so keep finger pressure even.
  4. Unclip the hazard switch and any HVAC connectors at the rear of the bezel before setting the trim aside on a clean cloth.
  5. Remove the screws (typically four, two upper and two lower) that secure the radio cage to the dash support bracket.
  6. Slide the radio rearward and disconnect the antenna lead and the multi-pin power/data harness on the back.
  7. The serial number sits on a printed barcode/sticker label on the top or side of the radio chassis, next to the part number and supplier markings.
  8. Photograph the label and double-check ambiguous characters such as 0/O, 1/I and B/8 before submitting the serial. If you are not comfortable working around airbag wiring or the deeply integrated climate cluster, have a professional installer take the unit out for you.
Dodge Charger 2023 radio serial number label location

Example: Dodge Charger serial number label location

Typical Radio Serial Prefixes and Formats

Year Dodge Charger Uconnect 4C (RA4) serial number formats:

  • T00AM – Primary Harman prefix for Uconnect 4C units
  • T00BE – Continental-sourced version

Radio designation: RA4 (Uconnect 4C, 8.4"). Serial: 14 characters (e.g., T00AM5028A1842). The final-generation Charger ran this platform through its last model year in 2024.

Note: The serial number is not the same as the part number (begins with P or 68). The serial alone generates the unlock code.

S/N Patterns and Prefixes

The factory radios on the 2023 Charger follow the standard Mopar/Uconnect serial style. The exact prefix depends on the Uconnect tier shipped with the car and the supplier (Visteon, Continental, Harman or Panasonic) that built the unit.

Uconnect 4C 8.4 (UAQ / UAS / UCQ)

  1. Typically printed as a 14-character alphanumeric string on the chassis label.
  2. Commonly begins with T - frequent prefixes include T00AM, TM9 and TQ1 - or with A2C on Continental-built variants.
  3. Usually a continuous run of letters and digits with no dashes or spaces.

Uconnect 4 7-inch (NA)

  1. Usually carries a Mopar/Harman or Panasonic-style serial on the chassis sticker, so the label on the unit itself is the authoritative reference.
  2. Copy the serial exactly as printed and avoid guessing characters that look unclear.

Fixing Common Code Entry Problems for 2023 Charger

The Charger's Uconnect 4C uses touchscreen-only input for code entry — no hardware keys are used. When the locked screen appears:

  • Tap each digit on the on-screen number pad.
  • The Charger's Uconnect auto-confirms after the 4th digit — no confirm button needed.

Should the screen not respond, cycle the ignition and wait 30 seconds.

Three wrong entries on the Charger's Uconnect 4C cause a 60-minute lockout, displaying "WAIT":

  1. Leave the ignition in the ON position — engine off is fine but ignition stays ON.
  2. Allow the entire 60 minutes.
  3. Cycling the ignition resets the timer.

Once clear, try the verified code again.

If the Charger's screen doesn't show after a battery event:

  • Ensure the ignition is fully ON (not ACC) and allow 15–20 seconds to boot.
  • Inspect the radio fuse — fuse failure prevents the display from powering.
  • On some 2023 Charger units, a OTA update may delay the code prompt — tap the screen once to trigger it.

If the screen stays dark, power issue is the most likely cause.

The RA4 label in the 2023 Charger shows two distinct identifiers:

  • Serial number — 14 characters, starting with T00AM or T00BE. Use this one.
  • Part number — begins with P05 or 68. Do not use this.

Dealer Mode via bezel corner press is most reliable way: System Info → Radio Part Info → Serial Number. No tools required.

Code failure on the Charger's RA4 usually means a serial number error. The label has the serial (14 characters, starts with T00AM or T00BE) and the part number (P... or 68...) — only the serial generates a code.

Re-check the serial on screen or the label and reach out for a free re-check if needed.

What Caused the Radio to Lock?

Charger owners face this most often because of:

  • Battery replacement — any battery swap triggers the lock on any Uconnect-equipped vehicle including the Charger.
  • Seasonal storage and battery drain — muscle sedans left parked over winter drain enough to trigger the anti-theft.
  • Performance electrical work — Charger enthusiasts working on the electrical system will trigger the lock.
  • Used purchase — buying a used Charger without the original unlock code means the radio is locked on arrival.

The unlock code is permanently linked to the serial number and does not change.

Get Your Dodge Charger 2023 Radio Code Now