Radio code for Chrysler Uconnect 5 UGA - VP2_5 JL ECE
Instant Radio Code Generation ⚡
Also compatible with: Dodge, Jeep, and RAM.
We're available round the clock.
Simply send us a video that shows both the code entry and serial number together.
View our complete Refund Policy.
1. Check out our service explanation video.
2. Browse through our customer reviews.
3. Explore our blog for verification, proof, and detailed information.
How to get your Chrysler Uconnect 5 UGA - VP2_5 JL ECE radio code?
1. Find the serial number on the label at the back of your radio. No VIN required.
2. Enter your serial number in the field provided.
3. Proceed to checkout to instantly receive your unlock code on screen and via email.
Supported partnumbers for model Chrysler Uconnect 5 UGA - VP2_5 JL ECE
:
PARTNUMBERS
68420238AA
68420238AB
68420238AC
68428548AA
68428548AB
68428548AC
68428548AD
68428548AE
68428548AF
Is this your radio?
Uconnect 5 UGA VP2.5 JL ECE is the Delphi-built 5-inch touchscreen Uconnect for European-market Jeep Wrangler JL and Gladiator JT - sits on the VP2.5 platform with DAB+ tuner, Apple CarPlay/Android Auto, no built-in maps. ECE denotes Economic Commission for Europe compliance (E-mark on the chassis label).
Vehicles with Chrysler Uconnect 5 UGA - VP2_5 JL ECE
- 2018-2023: Jeep Wrangler JL (Europe, base/Sport trims)
- 2020-2023: Jeep Gladiator JT (Europe, base trims)
If your JL is a US-market vehicle, you have a different Uconnect (R1 EXT NA or the 7-inch UAG/L variants). The ECE chassis label carries an E-mark stamp absent on NA units. Part numbers cluster in the 68420238 and 68428548 ranges.
Where to find your serial number
White printed label on the top of the chassis, near the back-right corner. Four 7mm bolts and two clips release the dash bezel; the radio slides forward enough to read the label from above without disconnecting the harness.
Format on the label: T0MYD##### (5 digits). Example: T0MYD58207.
How to enter the code once you receive it
Locked 5-inch screen shows a centred four-digit keypad. Tap the digits; the unit verifies automatically on the fourth digit. No Enter button on the VP2.5 lock UI.
Why your radio is locked
Battery disconnect, dead battery, jump-start failure, or removal of the radio during repair. Common after collision-shop battery work on JL Wranglers.
If you entered the wrong code
Three wrong codes shows "INCORRECT CODE - WAIT" with a 30-minute timer. Power must remain applied to the radio while the timer counts down.